|
Productdetails:
Betalen & Verzenden Algemene voorwaarden:
|
| Meetparameters: | Vochtigheid, dichtheid en temperatuur van SF6 -gas | Dauwpuntnauwkeurigheid: | ± 3 ℃ TD |
|---|---|---|---|
| Drukwaarde (dichtheid) nauwkeurigheid: | ± 0,1% FS | Temperatuurnauwkeurigheid: | ± 1 ℃ |
| Dagepuntsensor: | Dagepuntsensor | Druksensor: | <0,5S (bij 20 ℃) |
| Dauwpuntbereik: | -50 ...+20 ℃ TD/F | Drukbereik: | 0…+10 bar |
| Markeren: | 10AH Online Monitoring Systeem,PTZ-controle Online-bewakingssysteem,10AH sf6 gasmonitor |
||
| Parametercategorie | Detail |
|---|---|
| Meetbereiken | - dauwpunt: -50°C tot +20°C (Td/f) |
| - Druk: 0 tot 10 bar | |
| - Temperatuur: -40°C tot +80°C | |
| Berekende parameters | - Micro-water (20°C): 10 tot 20.000 ppm |
| - Druk/dichtheid (20°C): 1 tot 12 bar | |
| - SF6 Gemengde dichtheid: 0 tot 100 kg/m3 | |
| Uitgangsparameters | PPM20, P20, T (°C), Td, P (bar), Tdatm, dichtheid (kg/m3) |
| Precisiteit | - Dauwpunt: ±3°C (Td) |
| - Druk/dichtheid: ±0,1% FS | |
| - Temperatuur: ±1°C | |
| Reactietijd (20°C) | - Dew Point Sensor: 2 seconden. |
| - Druksensor: < 0,5 s | |
| Operatieomgeving | - Temperatuur: -40°C tot +80°C |
| - Overbelasting Druk: 20 bar | |
| - Vochtigheid: 0~100% RH (niet-condenserend) | |
| - Gassoort: SF6, SF6/N2 mengsels | |
| Communicatie | - Protocol: ModBus RTU |
| - Snelheid: 9600 bps. | |
| Elektrische specificaties | - Spanning: 1836VDC |
| - Energieverbruik: 3 W | |
| Mechanische specificaties | - Gewicht: 361 g. |
| - Beschermingsniveau: IP65 | |
| - Behuizing/aansluiting: roestvrij staal | |
| - Interface: M30×1,5 draad, M12 elektrische aansluiting | |
| Afdichtingsprestaties | - Luchtlekkage: ≤ 10−9 Pa·m3/s (heliumtest) |
| - Nominale inflatiedruk: 0,6 MPa (absoluut) |
Contactpersoon: Ms. Jin
Tel.: 15000093078